Technal Solar Shading
-
Aluminium sun shading system to meet the multiple needs of building envelopes and particularly of glazed facades: sun protection, solar gain control, optimisation of natural light and customisation.
- Fixed blades from 100 mm to 150 mm.
- A complete selection of accessories allows installation: on a canopy, on an offset vertical structure, or on a roof light.
- Installation: on aluminium structure offset from the facade, on canopy with stays, on roof light, on independent bearing structures.
- Angle of 15°, 30°, 45°, 60°
-
The louvre blades integrate fully with a standard cladding structure. Application in façade cladding and ventilation solution.
- The single-piece horizontal 120 to 270 mm blades are placed in front of the load-bearing structure giving a continuous visual effect
- Blade attachment by aluminium clamps
- Angle: 0°, 15°, 30°, 45°
-
The SUNEAL sun shading range meets the two main architectural concerns of today: aesthetics and solar energy management.
- A wide choice of sun shading blades is available:
- Single-piece blades from 100 to 300 mm
- Multi-part blades from 350 to 600 mm
- Semi-elliptical blades from 175 to 300 mm
- Rectangular 300 x 40 mm
- Louvres 100 and 115 mm
- Fixed or mobile
- Continuous blades on aluminium clamps
- Installed between uprights (steel, aluminium or wood primary structures)
- Rectangular type of blades
- Louvers type of blades from 100 and 115 mm
- Large perforated blades
- Angle: 0°, 15°, 30° and 45°
-
Elegant design ideal for contemporary and more traditional constructions. Handling of the blades by remote control, RTS compatible system.
• Max dimension 1 module: 4.5 x 6.5 m
• Max dimension 1 module with transom: 4 x 7 m
• Isolated
• Leaned on the wall
• Between walls
• In angle
• Combination
• Curved blade
• Flat blade
• Motorization tested over 20.000 cycles
• Tested in wind tunnel at CSTB*: 230 km/h in version leaned to the wall with flat blades
• Blade orientation up to 130°